Guide on replacing the P1S wifi antenna with an old laptop antenna. This guide does NOT increase the range or distance. It is meant to be an economical fix for those with defective wifi antennas (100% connectivity → 0% → 100% → 0%, etc).
There's a bug in Bambu's network plugin that causes the pin code to not be remembered after power cycles and sleep and reboots. This is compensated for in Orcaslicer 2.3 and higher. At the time of writing 2.3 is only a nightly build, so, here's the workaround:
open the orcaconfig.conf file on your Mac/pc. edit the top tag to read 'access_code' not user_access_code if it says it. Update pin there for your printer. Save, restart orca.
| Application | Port | Type | Comments |
|---|---|---|---|
| http API | 80/443/8080 | TCP | Cloud mode |
| mqtt | 8883 | TCP | Cloud mode |
| Remote video | 8000/21047/10001 | TCP | Cloud mode |
| Remote video | 10001-10512 | UDP | Cloud mode |
| Device binding | 3000 | TCP | Cloud mode |
| Device discovering | 1990/2021 | SSDP. multicast/broadcast | Cloud/LAN mode |
| LAN mode MQTT | 8883 | TCP | LAN mode |
| LAN mode FTP | 990/50000~50100 | TCP | LAN mode |
| LAN mode video | 322/6000 | TCP | LAN mode |
| NTP | 123 | TCP/UDP | Cloud/LAN mode |
Guide on decrypting and reading RFID tags.